3
Chapter 1 Cautions
Do not use this instrument outside and avoid humid or dusty areas. Use of this instrument in an improper
setting can increase the risk of electrical shock. Carefully read all safety instructions before using the
device to prevent accidents due to misuse.
1.1 Safety Symbols
The following safety symbols may appear in this user manual and on the device itself.
Caution: Carefully read the user manual for detailed information.
Earthing Required: Check that this terminal is earthed before operating the device to
prevent electrical shocks due to leakage or contact with the housing.
: Improper use of the device may result in instrument or testing DUT malfunctions.
: Improper use of the device may result in injury or death.
1.2 Avoid Self-Modification or Calibration
Never install surrogate parts onto the machine or undertake any device modifications and internal
calibrations yourself without the express permission of Microtest, as you may increase the levels of
danger associated with the device or damage the device.
1.3 Static Electricity
Keep items bearing static electricity away from the device to prevent damage.
1.4 Ground
A safe ground terminal is located on the outer housing of the back panel of the device; check that
this terminal is properly grounded to prevent contact with the housing and risk of electrical shock.
1.5 Power Supply
You must use a power supply cable that meets local national specifications and an
IEC320-compatible connector to connect the cable to the instrument. The user must check that the
earth wire is properly earthed. If a fuse is included in the power supply plug it must be a 3.15A fuse
To Next Page
Loading...
Need help?
General
