28
Appendix
Cleaning
Turn off the product and disconnect from AC power before cleaning. Turning the product off protects
against accidental touch selections that could cause problems or hazardous results. Disconnecting
power protects against hazardous interaction between accidental liquid entry and electricity.
To clean the case, dampen a clean cloth lightly with water and a mild detergent and wipe gently. Use
a soft, dry cloth to clean areas that have ventilation openings to avoid getting any liquid or moisture
inside. If liquid does get inside, do not use the product until it has been inspected and tested by a
qualified service technician.
To clean the touch screen, apply a glass cleaning solution to a soft cloth and wipe the screen clean.
To ensure that liquid does not enter the product, do not spray cleaning solution directly onto the touch
screen or any other part.
Do not use volatile solvents, waxes or any abrasive cleaners on any part of the product.
Solutions to Common Problems
Touch functionality doesn’t work or works incorrectly.
Completely remove any protective sheets from the touch screen, then cycle power Off/On.
Ensure that the touch computer is in an upright position with nothing touching the screen, then
cycle power Off/On.
To Next Page
Loading...