PART 1 EQUIPMENT INTRODUCTION
BT Series
ID-Mounted Pipe Beveling Machine.
FEATURES:
1. Cutter can hold 3 tool bits at one time
Automatic welding require OD Beveling, facing and internal beveling
Only using 3 bits at one time can guarantee the precision of beveling
2. New expanding structure
Newly designed expanding structure makes the machine more stable
3. New design main shaft fixation
Smaller gap from the machine to pipe.
Smoother beveling with less vibration
FAST SETUP
l Set up and operate from storage case to pipe in 1 minute
l Expanding nut makes the installation quickly
l One adjustment, universal three-leg chuck centers the machine in pipe I.D. automatically
l Install and adjust tool bits in seconds
l Can be installed any direction: horizontal, vertical or slant
EASY OPERATION
l The miniaturized design is suitable for low-clearance applications
l Ratchet wheel design makes tool feed easy, absorbs torque, reduces operator fatigue and
increases safety
l In-feed structure with scale for precise measurement
To Next Page
Loading...