Pause Mode
1) While cooking , if the door is opened and then closed, or if the " " pad
is pressed, the oven will enter Pause Mode.
2) While paused,the screen will display the remaining cook time.
3) In Pause Mode,if the " " button is pressed,the oven shall immediately enter
Ready Mod e ; I f the " " button , the oven will go into working mode.
End of Cook Cycle Mode
1) the cooking time has expired,the oven shall go into the End of Cook Cycle
Mode. And the screen will display " DONE ".
2) If either User Option OP:11 or OP:12 is selected, the oven shall continue
until opening the door or pressing the " " pad; If User Option OP:10 is selected,
after the 3 second beep, the oven shall display "DONE".After the beep, "READY" will
display and the oven will enter Idle Mode without an y operation for a period of time.
User Option Mode
This allows the user to change the configurations of the oven.
1) Open the oven door and press "2" pad for 5 seconds. The sounds once and
enter the User Option Mode.
2) The screen displays "OP: - -".
3) Press corresponding number button to enter related mode setting.(refer to
Appendix ) For example: to set the vo of the to medium. Press " 2 ",
"OP:22" displays. If you want to change it, keep pressing "2",the screen displays
"OP:20", "OP:21","OP:22", "OP:23", "OP:20" .....in cycle.
4) Press " " to save the current setting. After saved, "OP: - -" display again.
Note: a. During setting process, press " " to enter Door Open Mode. Close the door
will enter enter Ready Mode.
b. If " " button not pressed at the last step, the program be saved but
stay previous .
Manual Cook Mode
1) In Ready Mode, press the "Time Entry" pad. And the screen will display "00:00".
2) Press number buttons to input the cooking time.
5.
6.
7.
8.
OPERATION INSTRUCTION
14
is pressed
When
the beep tone
beep tone
oven will
B (Page 12) beep
will
will not
settingin the
lume
To Next Page
Loading...
Need help?
General
