4. Features
HRV (Heat Recovery Ventilator) employs advanced technology; the heat exchange core is formed by special paper that is
processed with chemical treatment and thus creates optimum results in temperature, humidity and cooling recovery.
Wide capacity range up to 2000 m
3
/h
Wide indoor and outdoor ambient operation range from -7°C to +43°C
High performance built-in DC fan motors ensure reliable performance complying with EU and ErP regulations
Differential pressure sensor is embedded inside（When the differential pressure is too high, automatically remind to
replace the filter）
Several operation modes; Auto, Bypass, Heat recovery, Free cooling mode
Slim and compact design of units, making the installation more convenient
Free cooling mode (Works when outdoor ambient temperature is below indoor ambient temperature)
New heat exchange element with high efficiency paper
Standard Built-in dust filter (G4); Optional F7 filter for air supply side and Class M5 filter for exhaust air side in line with
EU legislations can be customized
Optional CO
2
sensor connection（Automatically control fan speed according to different CO
2
concentration, please refer
below for more details）
No drain piping needed, thanks to sensible & latent heat transfer at heat exchanger
To Next Page