Need help?Do you have a question about the Midea Elite Series and is the answer not in the manual?
General| HSPF | Up to 10 |
|---|---|
| Refrigerant | R410A |
| Wi-Fi | Yes |
| Type | Split System |
| Cooling Capacity | 12000 BTU/h |
| Voltage | 230V |
| Features | Auto Restart, Sleep Mode |
| Heating Capacity | 12000 BTU/h |
Provides technical details for the compressor, including type, brand, and electrical characteristics.
Illustrates the electronic schematic of the control board and its components.
Details the wiring connections for cooling-only operation of specific MSE models.
Presents the wiring diagram for cooling-only operation of the MSE-18CR model.
Shows wiring connections for heating and cooling modes for specific MSE models.
Details the wiring diagram for heating and cooling operation of the MSE-18HR model.
Details various protection features such as delay restarts, sensor protection, and current overloads.
Explains the actions of the compressor and outdoor fan during cooling mode and auto fan control.
Covers compressor, outdoor fan, and indoor fan actions, including anti-cold wind and temperature protection.
Details the conditions and timing for the defrosting cycle, available for heating only.
Lists common failure phenomena and the corresponding operation and timer lamp indicators.
Provides step-by-step charts for diagnosing issues like no power or resetting phenomena.
Details specific failure scenarios based on indicator lights and provides troubleshooting steps.
To Next Page