06
2.2.1.1 Settings
The parameters are described as follows:
Parameter page Description
Network Settings
IP address
The IP address of the gateway is DHCP from router. Note:
Unchecking the DHCP checkbox allows you to modify the
static IP.
Mask Subnet mask with factory setting 255.255.255.0
Gateway Default gateway is xx.xx.xx.1 reference IPaddress
DHCP
If it is checked, the DHCP function is enabled. This function
is abled on factory settings
Server Settings Server IP address
Default server IP address is mqtt-report.ibuildinghvac.com
8883
US: mqtt-report-us.ibuildinghvac.com 8883;
Europe: mqtt-report-eu.ibuildinghvac.com 8883
gateway_settings
version Software version of gateway rmware
SN SN of gateway
After modifying parameters, click "Save" to automatically restart the gateway.
2.2.1.2. Firmware
Upgrade Gateway rmware: click "UpLoad" and select the correct rmware.
The rmware is successfully imported when the progress bar displays 100%. The gateway
automatically restarts and updates the rmware.
To Next Page
Loading...
