Midea i5C User Manual

1211
Applicable to Google Assistant & Amazon Alexa:
For using Google Assistant and Amazon Alexa, please make sure SmartHome APP has
been downloaded and matched with your robot successfully.
NOTE
Skill Name for Google Assistant
“SmartHome”
Skill Name for Amazon Alexa
“SmartHome”
Step1. Download SmartHome APP and link your robot successfully.
Step2. Get your Amazon Alexa or Google Assistant device ready.
Step3. By searching skill name above to link voice device and your robot.
(SmartHome account need to be registered in the process)
Step4. Voice-control your robot by using voice commands in the description.
start stop charge
Google
start <robot name>
turn on <robot name>
switch on <robot
name>
stop <robot name>
turn o <robot name>
switch o <robot
name>
dock <robot name>
<robot name> go home
<robot name> go
charge
Alexa
turn on <robot name> turn o <robot name> set charge mode on
Installation of Charging Base
PRODUCT INSTALLATION
Make sure the power cable is connected into the charging base.
Place the charging base flat against a wall and make sure there leaves enough space
to the base, as shown in the figure below.
Ensure the charging base is connected to a power supply.
1.
2.
3.
Installing the Side Brushes
Turn the unit over.
Attach the side brush to the matching post and press down until they fit into place.
Ensure side brushes can rotate freely.
1.
2.
3.

Midea i5C Specifications

General

Dustbin Capacity	600 ml
Noise Level	65 dB
Wi-Fi Connectivity	Yes
Charging Time	4-5 hours
Cord Type	Cordless
Battery Type	Lithium-Ion
Compatible Floor Types	Hard Floor, Low-Pile Carpet
Auto Recharge	Yes
Scheduling	Yes
Virtual Wall	Yes
Wet Mopping	Yes
HEPA Filter	Yes
Side Brushes	2
Drop Sensor	Yes
Bump Sensor	Yes
Remote Control	No
Type	Robot Vacuum Cleaner
Control	App & Voice Control
Features	Multi-floor Mapping, No-Go Zones
Main Brush	1
Climbing Ability	20 mm
Navigation System	Laser Navigation (LDS)
Dimensions	350 x 350 x 98 mm