Midea INNERCHEF Series - Page 12

11
• (Picture are for reference only, atual product may differ from picture shown)
NOTE
• Before closing the lid, check if the sealing ring is well installed.
• Hold the handle of upper cover, aim the lid as “unlock state”, put the top cover
horizontally on the cooker body, turn the upper cover clockwise for about 30°to the
lock place as “Lock State”.
5 Safely close the lid
• Check if the floater valve drops down before working (before heating, the floater valve
is down).
Lock State
6 Put the exhaust valve well
Sealing schematic Exhaust schematic
diagram diagram
• When working, please turn the exhaust valve to the sealing place, which means the
electric pressure cooker keeps at sealing state;
• For manual exhaust, please turn the exhaust valve handle to the exhaust place, the
electric pressure cooker keeps at the exhaust state; when exhausting, do not keep the
hands or face above the exhaust opening;