23
—— If the fault is not removed after above check, please contact our authorized service
center for repair.
• Add water accordingly.
• After cooking cycle
completes, leave the lid
on for 5 more minutes.
• Too little water.
• Lid opened prematurely.
Rice half cooked or too
hard
SolutionReason SolutionProblem
• Turn the exhaust valve to
the sealing position.
• Send to the service center
for repair.
• Exhaust valve not in
sealing position.
• Pressure control fails
Steam comes out from
exhaust valve non-stop
• Reduce water
accordingly.
• Too much water.Rice too soft
• Add water according to
the requirement.
• High temperature since
there isn’t water in the
inner pot.
• Put the inner pot
correctly.
• Send to the service center
for repair.
• High temperature since
there isn’t water in the
inner pot.
• Pressure switch fault.
Display screen
displays E1
Display screen
displays E2
Display screen
displays E8
Display screen
displays C1
• Please check the power
socket.
• Send to the service center
for repair.
• Power socket bad
contact.
• Bottom sensor fault.
Power indicator doesn’t
light on
All indicators flas
To Next Page
Loading...
