- - 16
7.2.3 风机组件更换 Fan Assembly Replacement
工具：十字螺丝刀 Tool: Cross Screwdriver
操作步骤：Operation Step:
1. 按照 6.8 风机组件拆卸步骤方法将损坏的风机组件拆卸下来；
Dismantle the damaged fan assembly according to fan assembly dismantling step in 6.8;
2. 准备好替换的完好的风机组件，按照 6.8 相反的步骤顺序将风机组件安装好。注意罩极电机和电容
电机的拆卸安装区别。
Prepare the intact fan assembly for replacement; install the fan assembly according to the contrary step
sequence of 6.6. Pay attention to the dismantling and installation difference of shaded-pole motor and
capacitor motor.
7.2.4 射灯更换 Spotlight Replacement
工具：十字螺丝刀 Tool: Cross Screwdriver
操作步骤：Operation Step:
1. 按照 6.5 射灯拆卸步骤方法将损坏的射灯拆卸下来。
Dismantle the damaged spotlight according to spotlight dismantling step in 6.5.
2. 准备好替换的完好的射灯，按照 6.5 相反的步骤顺序将射灯安装好。注意射灯的规格和型号是否一
致。
Prepare the intact spotlight for replacement; install the spotlight according to the contrary step sequence
of 6.5. Pay attention to whether the spotlight specification and model is consistent.
To Previous Page
Loading...
Need help?
General
