Midea JL1850S-RO

17
5. Additional remarks
Non-filter reset mode, the button functions are as follows:
Button
Operation
Function
Hot water + warm water
Hold for 3 seconds
Reset the expired filter
Warm water + cold water
Hold for 3 seconds
Enter single filter reset mode
Child lock + cold water
Completed within 20
seconds after power-on
Hold for 10 seconds
Restore factory settings
Single filter reset mode, the button functions are as follows:
Button
Operation
Function
Cold water
Touch
Select the next filter
Cold water
Hold for 3 seconds
Reset the current filter
Operational precautions
Changing Filters
1. The name of the filter keeps on during operation. When the filter life reaches 0, the
corresponding filter indicator flashes, otherwise it is always on.
2. The filter life data is as follows. The filter life is continuously decreasing when it is
powered on (no matter whether it is producing water):
PP
C’
RO
C”
3~6 months
6~12 months
12~24 months
6~12 months
Note: 30 days for 1 month.
3. Please cut off the power supply and water supply before replacing the filter.
4. Flush the new filter according to the filter flushing requirements in the installation