Midea JL1850S-RO

31
Remove
and
replace
the top
cover
Remove the 2 screws of the
top cover
Lift the edge of the top
cover slightly to remove it
from the front housing
State of top cover after
opening
Remove
and
replace
the UV
Remove the 2 screws of the
water tank cover
Open the 2 buckles of the
water tank
Open the water tank cover
Find the UV-pair terminal
to separate it
Use a wrench to unscrew
the UV nut inside the tank
cover
Replace it
Replace
the
water
tank
Unplug the connecting
pipes and wires
Remove 2 screws
Push the water tank
forward and lift it off the
side board