Midea LSBLG MCF Series

Flooded type water cooled screw chiller (MIC) MCAC-CTSM-2018-1
34
Display
Button
Function
Prg
Open the display screen, and enter the password to enter programming mode
• In the alarm state, the display alerts the queue;
• When the "producer" level is under the rolling parameters, the display shows the
interface
Esc
• To exit the programming (maintenance / producer) and display mode;
• set a parameter, then exit without saving changes
UP/DOWN
• Display screen navigation;
• Increase / decrease the value
Enter
• from the parameter setting mode, the display switches to
• Confirm the list of parameters and return the value
1
Display suction superheat
2
Display EXV opening
3
Relay output status
4
Alarm
5
Start of the protection
6
Control state
Remove cover
Change display