Midea M-INTERFACE - Remote Network Connection Methods

Installation & Owner's Manual
11
Fig.4-3
Type “ipcong” in the above gure, then the interface will display the local dynamic IP address, and it
will write this IP address into the property dialogue box, and nish the statistic IP address conguration,
details please consult the local network administrator.
After the statistic IP address configuration, open the property dialogue box again, select the
“Advanced”, and display the TCP/IP setting dialogue box as follow:
Fig.4-4
Click the “ADD” button under IP address column, and add a IP address with the same network
segment of “192.168.100.40”, such as IP: 192.168.100.101, sub network cover code: 255.255.255.0,
and click “OK” button.