5
Boiling - Keep Warm
Instructions for use
Reminder
Unlock
Pour out
water
• Before the first use or after a long period of storage, add 2-3 L of water to inner liner and boil 1-2 times to clean the inner liner.
At this time, the boiled water can not be drunk!
• This product is suitable for use up to 3,000 meters above sea level.
• Be careful not to wet the kettle body when filling water.
• The “Keep Warm” setting can be carried out when boiling water or after boiling water.
The “Keep Warm” function indicator flashes, indicating that the water temperature has not reached the pre-set “Keep Warm”
temperature.
The “Keep Warm” button can select the “Keep Warm” temperature cyclically.
• Press and hold “Pour out water” button before unlock the kettle, the “Unlock” indicator flashes to prompt user to unlock.
• Preventing dry burning: in order to prevent the machine from dry burning malfunction. Please check in order to prevent
the machine from dry burning malfunction. Please check the water level in the water bottle regularly.
If the water content is insufficient, please add water immediately.
• You can’t collect water by unplugging the power cord. Under other conditions such as Shut Down, Standby, etc., press the
“Unlock”, and press the “Pour out water” button to release water.
1. In locked state, the corresponding function indicator will light off; click on the corresponding button, the
corresponding function indicator will light on constantly, and the kettle enters the unlocked state. If
there is no operation within 10 seconds after the unlock light is on, the unlock indicator will light off
after 10 seconds and returns to the locked state.
2. In unlocked state, the correspondi
ng function indicator will light on constantly Click on the
corresponding button to enter locked state, the corresponding function indicator will light off.
1. In unlocked state, press and hold “Pour out water” button to take water.
2. In locked state, press and hold “Pour out water” button, the corresponding function indicator
flashes for 5 seconds to prompt the user to unlock.
Add 1 L to 5 L of water to the kettle with a water container, and the water
level should not exceed the full water mark.
To Next Page
Loading...
