8
Security lock
Disassembly of kettle lid
When the power is turned on, the security lock function is activated,
the “Pour out water” function is no available.
Press the “Unlock” button, the unlock indicator light is on, and the
water outflow function is available.
Open the lid of the kettle, the lid and the horizontal level are at 20~30
degrees.
Hold the kettle body with one hand and
pull lid slightly with the other hand to remove the lid.
During installation, the rotating shaft of the
lid is to be aligned with the clamp position on the body of the kettle,
and inserts the lid at
20-30 degrees at the horizontal level.
When you hear a click sound, the lid is installed in place.
Unlock
To Next Page
Loading...
