ITEM PICTURE HOW TO DISASSEMBLE
Take down the
panel, cover switch,
water
inlet valve,
water level sensor,
and internal wire
subassembly
Remove the back control panel
screws, and take out the back
Remove the cover switch screws.
Take down the water inlet valve.
Remove the water level sensor
Take out the internal wire
First remove the door bolt.
Take down the lid
Take out the spring
• Unplug power cord for the work such as disassembling
which is not unnecessary to power on . Do not hold the plug
by a wet hand.
Failing to unplug may cause an electric shock.
WARNING
13
To Next Page
Loading...
