Midea MAE50-S1102GPS Service Manual

Service manual for portable washer Midea America Company
-------------------------------------------------------------------------------------------------------------------------------------------------------
－ 10 －
B. In a standpipe The standpipe must be no shorter than 32 in.
(81cm) and no longer than 39 in. (100cm).
C. In a laundry tub. The laundry tub must be no shorter than
32 in. (81cm) and no higher than 39 in. (100cm).
Leveling the washer
1. Open the lid of the washer, and pour some water into the tub
to just below the impeller level.
2. If the washer is level, the impeller is positioned at the center of
the washer. If not, level your washer by turning the front
leveling feet clockwise or counterclockwise as necessary.
Note: There is ONLY ONE adjustable leg on this washer.
Power on the unit and have a test operation
Connect the power to a socket which is correctly installed and properly earthed.
Open all faucets for water inlet.
Close the lid of the unit.
Power on the unit by pressing the ON/OFF button. Select the Rinse + Spin cycle for test operation.
Then press the Start button for test.

Midea MAE50-S1102GPS Specifications

General

Style	top load
Color	white
Washer Capacity	1.6 cubic feet
Max Spin Speed	800 revolutions per minute
Internal Heater	no
Control Panel	digital
Delay Start / End	yes
Child Lock	no
Steam	no
Annual Energy Consumption	290 kilowatt hours
Voltage	120 volts

Weight and Dimensions

Depth	20.25 inches
Height	36.25 inches
Width	20.69 inches
Net Weight	68 pounds