10
Removal of steam valveCleaning and Installation
Note: The moveable cover plate must be cleaned after every use, to ensure the steam vent to
be smooth. After cooling down, clean it and avoid scald.
with a hand, hold the rear side,
and lift it up.
A sketch of opening. Wash it with water after opening.
Note: If the gasket falls off, push it in.
Press down to install the steam valve.
Cleaning and Maintenance
As shown, suppress the steam valve
bankai pinch open the steam valve
As shown: two buckle bit after the
close alignment of the steam valve,
fasten pinch, it would be correct if
you can hear a noise.
To Next Page
Loading...
