bracket
14
1. The induction hotplate must be installed by qualified personnel or technicians. We have professionals
at your service. Please never conduct the operation by yourself.
2. The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes
dryer, as the humidity may damage the hob electronics
3. The induction hotplate shall be installed such that better heat radiation can be ensured to enhance
its reliability.
4. The wall and induced heating zone above the table surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6. A steam cleaner is not to be used.
Fix the hob on the work surface by insert 4 brackets on the bottom of hob(see picture) before
installation.
Adjust the bracket position to suit for dierent table top thickness.
Adjusting the Bracket Positio
The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the
controls protruding from the hob.
Before Locating the Fixing Brackets
CAUTIONS
Under any circumstances, the brackets cannot touch with the inner surfaces of the worktop after
installation (see picture).
To Next Page
Loading...
