9
INSTALLATION
work properly.
If the dryer is not placed horizontally (tilt angle more than 2°), the dryer may not
Notice when installing:
• Do not install the dryer in the open air or a place where
it can be damaged easily by rain;
• Do not place the back of dryer near curtain or something
moved by wind;
• Do not place the dryer near gas or flammable materials.
•
• Connect one end of the flex tube to the back vent, then fix it firmly until it's tight.
• The other end of flex tube will be extended to outdoor, for the proper assembly please
refer to the below pictures.
Exhaust duct installation:
Note!
• Level Adjusting
Once in its permanent operating position,
check that the dryer is absolutely level with the aid
of a spirit level. If it is not, adjust the feet with a tool.
To Next Page
Loading...
