18
OPERATION
Programme selector
1.When the LED display screen brightens up, rotate the programme knob to select the
desired programme.
2.Select the【Delay】,【Time】,【Intensity】,【Anti-Crease】 functions for
additional options.
3.Press the【Start/Pause】button.
4.Press the【On/Off】button after the programme has comlpeted.
Programme start
Programme end
The drum will rotate after the programme starts. The cycle phase LED in the display
will light up and the remaining programme time will be displayed.
Programmes
1.The drum will stop rotating after the programme ends. The display will show "0:00",
also the cycle phase LED showing "End" and related LED will illuminate. The dryer
will start【Anti-Crease】function if user doesn't remove the load. (Refer to page 17).
Please press【On/Off】button after unloading the tumble dryer to cut off power and
pull out the plug.
2.Deal with the problems according to “Trouble Shooting” section, if there is an
unexpected stop during the drying procedure or the dryer shows an Error Code (Refer
to page 24).
To Next Page
Loading...
Need help?
General