17
OPERATION
Intensity
My Cycle
Display
Child lock
Remaining Time indicator/Error message
Clean filters (warning)
Anti-crease
Empty water container (warning)
Anti-Crease
At the end of the drying cycle, the anti-crease time is 60 minutes (default) or 30 120 minutes (selected).
This function prevents the laundry from creases. The laundry can be removed during the anti-crease phase.
Except【Cool】,【Wool】and【Refresh】, all the other programmes have this function.
、90、
Anti-Crease
My Cycle
Used to define and save your favourite programme, which is used frequently.
1.Select the desired programme and other drying functions.
2.Press and hold the【Intensity】for 3 seconds until the beep sounds and the desired programme has been saved.
3. Turn the programme selector to the【My Cycle】 position, then you can start your favourite programme. If you want to
change the【My Cycle】 settings, repeat the steps (1) and (2).
My Cycle
Child Lock
1.This machine incorporates a special child safety lock, which can prevent children from carelessly pressing buttons or
making the faulty operation.
2.When the drying cycle is running, press the【Anti-Crease】and【Time】buttons at the same time for 3 seconds to
start child lock function.
3.When child lock function is set, the display will show Child lock icon and all button are deactivated, except【On/Off】
button.
4.To deactivate the child lock function, the【Anti-Crease】and【Time】buttons shall be pressed at the same time for
3 seconds.
Child Lock
To Next Page
Loading...
