16
OPERATION
Option
Delay
This function is used for delaying the start of the drying programme up to 24 hours.
When the delayed programme starts, the time starts to countdown on the display and
the delay icon blinks.
1.Load your laundry and make sure the machine door is closed.
2.Press the 【On/Off】button,then use the programme selector knob to select
the desired programme.
3.You can additionally select the 【Anti-Crease】or【Signal】functions according to
your need.
4.Press the【Delay】 button.
5.Repeatedly to press the 【Delay】button to select the desired delay time.
6.After the 【Start/Pause】 button is pressed, the Dryer is at the running condition.
The drying procedure will be automatically performed when the delay time is over.
7.If you press the【Start/Pause】button again, the delay function will be paused.
8.If you want to cancel the “Delay” function, please press the 【On/Off】button.
Delay
Dry Level
You can adjust the dryness level of the laundry by pressing the【Dry Level】button.
There are four grades.
1.The intensity function can be activated only before the programme starts.
2.Press the【Dry Level】button repeatedly to increase the drying grade.
3.Except the【Cotton Iron】,【Wool】,【Warm】,【Cool】,【Refresh】
programme, all the other programmes can be adjusted with the【Dry Level】function.
Dry Level
Anti-Crease
At the end of the drying cycle, the anti-crease time is 30 minutes (default) or 120 minutes (selected). This function
prevents the laundry from creases. The laundry can be removed during the anti-crease phase. Except【Cool】,
【Wool】and【Refresh】, all the other programmes have this function.
Anti-Crease
Time
When the【 Warm】 or 【Cool】 or 【Refresh】 programme is selected, the 【Time】
button can be used to adjust the drying time in 10 min. steps.
Time
Silence
Rotate speed of the drum will drop down to reduce the noise of the dryer,but the drying time will
extend.
Silence
To Next Page
Loading...
Need help?
General