Midea MDS70-V032_A0431-EU18-P1

5
OrdinaryInformation
1.Pleaseunplugthepowercordwhenyoudisassembleormaintaintheproduct；
2.Pleaseusetheregulationconnectorlugbetweenthewiresasmuchaspossible.Thencrimp
themfirmly bythepropertoolsandbundlethembytheinsulatingtape;
3.Whenyouplugthewires,pleaseinserttheplugtothe
bottomsoitisnoteasilytobe
unplugged;
4.Makesurethatthewirescannottouchthemobilepartsuchlikethedrum,andalsocannot
touch thesharp/hard‐edgedpartyandhigh‐heatpart(motor);
5.Pleasepreservethescrewswhenyoutakethemdown.Youwillusethemwhenyouinstall
the
dryer;
66.ometimesyoumustoperatethedryerwhenitiselectriferous.Inthiscase,youmustbe
carefuland payattentiontotheelectricshock.
2UnpackingWaysOfMainParts