3 OPERATION
31
Delay
Set the Delay function:
1. Select a programme
2.Press the Delay button to choose the time(the delaying time
is 0-24 H.)
3.Press [Start/Pause] to commence the delay operation
Delay
Cancel the Delay function:
Press the [Delay] button until the display be 0H.It should be
pressed before starting the programme. If the programme
already started, should select [Off] to reset the programme.
Pre Wash
The Prewash function can get an extra wash before main wash,
it is suitable for washing the dust rises to surface of the clothes;
You need to put detergent into the Case (I) when select it.
Extra Rinse
The laundry will undergo extra rinse once after you select it.
• If there is any break in the power supply while the machine
is operating, a special memory stores the selected
programme and when the power is restarted, press the
[Start/Pause]button the program will continue.
Spin
Press the button to change the spin speed.
1400: 0-400-600-800-1000-1200-1400
• When the lights of spin speed are off means the spin
speed is 0.
Caution!
Caution!
Choose the Programme
Setting time
Start
To Next Page
Loading...
Need help?
General
