MCAC-2008-11 Air-cooled Modular Chiller
63
Operation procedure of wired controller:
1. Press AUTO/MANUAL mode at shutdown status, you could select MANUAL or AUTO turn-on mode as
you want. The function is invalid at startup status.
In Manual mode, press [PAGEUP/TEMP+] or [PAGEDOWN/TEMP-] button for select your require online
unit quantity.
2. Press [TEMP SET], [PAGEUP/TEMP +], [PAGEDOWN/TEMP -] button, for select your require
temperature.
For KJR-08B/BE: Cooling range:5~17 ; Heating range:45~50 . ℃℃
3. Press [ON/OFF] button, running indicator of wire controller is light, unit is start to run, and display running
status at wire controller. Press this button once again, unit will stop running.
●Operation procedure of Time ON
1. Press [TIME ON] button adjust your require time by [PAGEUP/TEMP+] or [PAGEDOWN/TEMP-]
(MINUTE and HOUR could be shifted by this button). Use the same method to set Time off.
(Note: Time ON/OFF is relative time.)
●Operation procedure of disable the function of Time ON/OFF.
1. Long press [TIME ON] button, you could cancel this function. Long press [TIME OFF] button, you could
cancel this function.
To Next Page
Loading...
Need help?
General