Midea R410A Full DC Inverter Split Type Series Technical Manual MCAC-UTSM-201406
93
3.4 Operation instructions
3.4.1 Preparatory operation
Set the current day and time
Press the TIMER button for 3 seconds or more. The timer display will flash.
Press the button ‘+’ or ‘-‘ to set the date. The selected date will flash.
The date setting is finished and the time setting is prepared after pressing TIMER
button or there is no pressing button in 10 seconds.
Press the button ‘+’ or ‘-‘ to set the current time. Press repeatedly to adjust the current
time in 1 minute increments. Press and hold to adjust the current time continuous.
(Sample: Monday AM 11:20)
The setting is done after pressing TIMER button or there is no pressing button in 10
seconds.
3.4.2 Start/stop operation
Pressure the POWER button. If air conditioner is on, operation lamp lit brightly.
If air conditioner is off, operation not lit.
3.4.3 Set the operation mode
Press the MODE button to set the operation mode.
Press the button ‘+’ or ‘-‘ to set the room temperature. Indoor setting temperature range:
17~30ºC.
To Next Page
Loading...
Need help?
General
