M thermal Mono
68 202005
Midea M thermal Mono Engineering Data Book
1 Preface to Part 3
1.1 Notes for Installers Boxes
The information contained in this Engineering Data Book may primarily be of use during the system design stage of a
Midea M thermal Mono project. Additional important information which may primarily be of use during field installation
has been placed in boxes, such as the example below, titled “Notes for installers”.
1.2 Definitions
In this Engineering Data Book, the term “applicable legislation” refers to all national, local and other laws, standards, codes,
rules, regulations and other legislation that apply in a given situation.
1.3 Precautions
All system installation including installation of water piping and electrical works must only be carried out by competent
and suitably qualified, certified and accredited professionals and in accordance with all applicable legislation.
Notes for installers boxes contain important information which may primarily be of use during field installation,
rather than during desk-based system design.
To Next Page
Loading...
