Midea MHC-V6W/D2N8-B User Manual

M thermal Mono
202004 53
4.2 E0, E8 Troubleshooting
Digital display output
Description
 Water flow failure.
 E0 indicates E8 has displayed 3 times. When an E0 error occurs, a manual system restart is required before the system
can resume operation.
 M thermal Mono stops running.
 Error code is displayed on hydronic system main control board for refrigerant system and user interface.
Possible causes
 The wire circuit is short connected or open.
 Water flow rate is too low.
 Water flow switch damaged.
Midea CAC Confidential

Midea MHC-V6W/D2N8-B Specifications

General

Brand	Midea
Model	MHC-V6W/D2N8-B
Category	Air Conditioner
Language	English