MCAC-UTSM-2008-05 Standard Controller
Control 101
Precautions
Curtain, door or the similar objects will prevent the remote signal from being received by air conditioner.
Do not get the interior of remote controller wet.
It is forbidden to expose it to direct sunlight or locate it in the place with high temp.
Malfunction may occur if infrared signal receiver on air conditioner is exposed to sunlight.
Please shelter the signal receiver from sunlight with curtain.
Please remove the nearby electronic device for they may affect the performance of remote controller.
Do not put the used or different batteries into the remote controller, otherwise remote controller will fail to
send signal.
Please remove the batteries before long period unused, otherwise the remote controller may be damaged.
If pressing the button reset the remote controller, which indicates low battery, please replace the batteries.
If no receiving sound is heard from indoor unit or on remote controller does not flash, please replace the
batteries.
Effective transmitting distance of remote controller is 8m, please aim the signal sending part to the receiver
on air conditioner.
Model and specification
Model R05/BGE
Rated voltage
3.0V(2pieces of LR03 7＃ batteries)
Min voltage for sending signal of CPU 2.4V
Effective receiving distance 8m~11m
Operation condition
-5~60℃
To Next Page
Loading...
Need help?
General
