OPERATING iNSTRUCTiONS
OPERATING CONDiTiON
• The air conditioner must be operated within the ambient temperature range indicated below:
MODE ROOM TEMPERATURE
COOL 17°C~32°C / 62°F~92°F
DRY 13°C~32°C / 54°F~92°F
iNSTALLATiON iNSTRUCTiONS
Vertical
window
4 41,
I -4- c::)
Window Slider Kit
Minim um:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
Fig.8
Horizontal "_
window
Window Slider Kit
Minimum:67.5cm(2.22ft).
Maxmum:123cm(4.04ft).
m
Fig.c
iNSTALLATiON iNSTRUCTiONS
Location
® The air conditioner should be placed on a firm
foundation to minimize noise and vibration. For
safe and secure positioning, place the unit on a
smooth, level floor strong enough to support the unit.
o The unit has casters to aid placement, but it should
only be rolled on smooth, flat surfaces. Use caution
when rolling on carpet surfaces. Do not attempt to
roll the unit over objects.
• The unit must be placed within reach of a properly
rated grounded socket.
• Never place any obstacles around the air inlet or
outlet of the unit.
ti Allow at least 30cm(0.98ft) of space from the wall
for efficient air-conditioning.
• Do not use an extension cord.
Window kit installation
Your window kit has been designed to fit most
standard "Vertical" and "horizontal"window
applications, However, it may be necessary for you to
improvise/modify some aspects of the installation
procedures for certain types of window. Please refer
to Fig. 8& Fig.9 for minimum and maximum window
openings.
Note: If the window opening is less than the mentioned
minimum length of the window slider kit, cut that one
with holes in it short to fit for the window opening.
Never cut out the hole in window slider kit.
To Next Page
Loading...
Need help?
General
