41
Buttons and Functions
1
4
2
3
Boost
5
8
9
12
6
7
10
11
13
14
Model:
RG10A2(B2S)/BGEFU1.
RG10A10(B2S)/BGEF(20-28°C/68-82°F).
RG10A(B2S)/BGEF & RG10A(B2S)/BGEFU1
( Fresh feature is not available)
RG10A2(B2S)/BGCEFU1 & RG10A2(B2S)/
BGCEF(Cooling only models, AUTO mode
and HEAT mode are not available)
Description
ON/OFF
No.1
No.3
No.4
No.5
No.6
No.8
No.2
No.7
No.9
No.10
OK
Used to confirm the selected functions
TEMP.
Decreases temperature in 1°C (1°F) increments. Min. tem-
perature is 16°C (60°F)
TEMP.
FAN SPEED
No.11
TEMP.
Increases temperature in 1°C (1°F) increments. Max. tem-
perature is 30°C (86°F).
(Press together & buttons at the same time for 3 seconds
will alternate the temperature display between the °C & °F).
SET
MODE
Auto > Cool > Dry > Heat > Fan
AU > 20% > 40% >60% > 80% > 100%
Press the TEMP or button to increase/ decrease the fan
speed in 1% increments.
No.12
No.13
No.14
No.15
ECO/GEAR
ECO > GEAR(75%) > GEAR(50%) > Previous setting mode
> ECO
LOCK
Press together these two buttons simultaneously for 5 seconds
to lock the keyboard. Press together these two buttons for 2
seconds to unlock the keyboard.
NOTE: HEAT mode is not supported by the cooling only
appliance.
SWING
Starts and stops the horizontal louver movement. Hold
down for 2 seconds to initiate vertical louver auto swing
feature(some units).
CLEAN
Used to start/stop the Self Clean or Active Clean function.
Clean
Boost Clean
LED
LED
BOOST
Reach desired temperature in shortest possible time.
Boost
BREEZE AWAY
Avoids direct air flow blowing on the body
(This feature is available under cool, Fan and Dry mode only)
Air magic/UV lamp > Sleep > Follow Me > AP mode >
Air magic/UV lamp
*
*
*
[*]: Model dependent
To Next Page
Loading...
