Midea MSXE-10CRDN8 - Page 44

42
LOCK
Press together these two buttons simultaneously for 5 seconds
to lock the keyboard. Press together these two buttons for 2
seconds to unlock the keyboard.
Boost Clean
35
Buttons and Functions
1
4
2
3
Boost
5
8
9
12
6
7
10
11
13
14
Model:
RG10A1(B2S)/BGEF
Description
ON/OFF
No.1
No.3
No.4
No.5
No.6
No.8
No.2
No.7
No.9
No.10
OK
Used to confirm the selected functions
TEMP.
Decreases temperature in 1°C (1°F) increments. Min. tem-
perature is 16°C (60°F)
TEMP.
FAN SPEED
No.11
TEMP.
Increases temperature in 1°C (1°F) increments. Max. tem-
perature is 30°C (86°F).
(Press together & buttons at the same time for 3 seconds
will alternate the temperature display between the °C & °F).
SET
MODE
Auto > Cool > Dry > Heat > Fan
AU > 20% >40% > 60% > 80% > 100%
Press the TEMP or button to increase/ decrease the fan
speed in 1% increments.
No.12
No.13
No.14
No.15
ECO/GEAR
ECO > GEAR(75%) > GEAR(50%) > Previous setting mode
> ECO
NOTE: HEAT mode is not supported by the cooling only
appliance.
SWING
Starts and stops the horizontal louver movement. Hold
down for 2 seconds to initiate vertical louver auto swing
feature(some units).
CLEAN
Used to start/stop the Self Clean or Active Clean function.
Clean
LED
LED
BOOST
Reach desired temperature in shortest possible time.
Boost
Breeze away > Sleep > Follow Me > AP mode >
Breeze away
*
*
*
[*]: Model dependent
Air magic
Used to start/stop the Air magic and UV-C lamp (if any)
function.