EasyManua.ls Logo

Midea MSY-09HRDN1-QC8 - Drying Mode; Heating Mode

Midea MSY-09HRDN1-QC8
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
Indoor fan turns to turbo speed.
After running for 30 minutes the machine will turn back to previous setting mode.
8.5.6 Indoor fan operation rule.
In cooling mode, indoor fan runs all the time and the speed can be selected as high, medium, low
and auto.
Auto fan in cooling mode acts as follow:
8.5.7 Condenser high temperature protection function(in cooling and drying mode)
If T360 for 5 seconds, compressor will stop immediately, and the machine will not resume until T3
52.
8.6 Drying mode
8.6.1 Indoor fan speed is fixed at breeze grade and cant be changed. The horizontal angle is the
same as in cooling mode.
8.6.2 Room overlow temperature protection
In drying mode, if room temperature is lower than 10, compressor will stop and not resume until
room temperature climbs up to 12.
8.6.3 Evaporator anti-freezing protection, condenser high temperature protection and outdoor
unit frequency limit are valid, and they are the same as that in cooling mode.
8.6.4 Horizontal louver action is the same as that in cooling mode.
8.7 Heating mode
8.7.1 Indoor fan action:
Anti-cold-wind function.
If the compressor stops caused by room temperature rising, indoor fan will be forced to run 127
44
38
37
34
33
24
17
setting fan speed
low
breeze
super
fan stop
Evaporator
ΔT=(room temp)
(setting Temp)
mediu
4.
3.
1.
1.
high
low

Related product manuals