Midea MWMWT080CR2A - Prepare the Air Conditioner

17
Installation
Instructions
13
1. Prepare the Window
2. Prepare the Air Conditioner
H in Table 1). Side louvers and the rear of the AC must have clear air space to allow
enough airflow through the condenser for heat removal. The rear of the unit must be
outdoors, not inside a building or garage.
Mounting Hardware
3/4’’ (or 1/2”)
Screws
(7)
Lock Frame
(For Wooden windows)
(2)
Sash Lock
(1)
Window sash
seal foam
(none glue)
(1)
window sash seal
foam with glue
(1)
Lock Frame
(For Vinyl-Clad windows)
(2)
Before installing the unit, the top rail must be assembled on the unit.
A: Remove the air conditioner from the carton and place on a flat surface.
B: Remove top rail from the packaging material as shown in Fig. D.
3/8” Screws
(4)
Top Rail
(1)
Top Rail Hardware
Packaging
Fig. D
Top Rail
Top Rail
When handling unit, be
careful to avoid cuts from
sharp metal edges and
aluminum fins on front and
rear coils.
CAUTION
Fig. D