ENGLISH
10
Setting both TIMER ON and TIMER OFF at the same time
Keep in mind that the time periods you set for both functions refer to hours after the current time. For
example, say that the current time is 1:00 PM, and you want the unit to turn on automatically at 7:00 PM.
You want it to operate for 2 hours, then automatically turn off at 9:00 PM.
Do the following:
Example: Setting the unit to turn on after 6 hours, operate for 2 hours, then turn off (see the figure
below)
Your remote display
To Next Page
Loading...
Need help?
General
