Midea RG58N2/BGEF User Manual

ENGLISH
12
How To Use The Basic Functions
●
Press the SET button to enter the function
setting, then press SET button or Temp
or
Temp
button to select the desired
function.
●
The selected symbol will flash on the display
area, press the OK button to confirm.
●
To cancel the selected function, just perform
the same procedures as above.
●
Press the SET butt
on to scroll through
operation functions as follows:
Active clean (
) g Sleep( )g Follow Me( )
Active Clean Function(
)
●
This function is used to clean the air
conditioner evaporator to prevent frosting.
●
When this function is turned on, the indoor
unit
display window appears CL , after 20 to
45 minutes, the unit will turn off automatically
and cancel Active Clean function.
SLEEP Function(
)
The SLEEP function is used to decrease
energy
use while you sleep (and don t need
the same
temperature settings t
o stay
comfortable). This
function can only be
activated via remote control.
For the detail, see sleep operation in
USER S
MANUAL.
Note:
The SLEEP function is not available in
FAN or DRY mode.
FOLLOW ME function(
)(optional)
The FOLLOW ME function enable
s the
remote
control to measure the temperature
at its current
location and send this signal
to the air conditioner
every 3 minutes interval.
When using AUTO, COOL, or HEAT modes,
measuring ambient temperature from the
remote
control (instead of from the i
ndoor
unit itself) will
enable the air conditioner to
optimize the
temperature around
you and ensure maximum
comfort.

Midea RG58N2/BGEF Specifications

General

Brand	Midea
Model	RG58N2/BGEF
Category	Remote Control
Language	English