Midea RG58N2/BGEF User Manual

ENGLISH
13
How To Use The Advanced Functions
ECO/GEAR func
tion ( )
NOTE:
This function is only available under
COOL
mode.
•
Press ECO/GEAR butto
n to enter the energy
efficient mode in a sequence of following:
ECO ė
ė
GEAR(75%)
ė
GEAR(50%)
ė
Previous setting mode
ė
* ECO
ė
......
ECO operation:
• Under cooling mode, press this button, the
remote controller will adjust the temperature
automatically to 24°C, fa
n speed of Auto to
save energy(but only if the set temperature is
less than 24°C). If the set temperature is
above 24°C , press the ECO button, the fan
speed will change to Auto, the set
temperature will remain unchanged.
NOTE:
•
Pressing the ON/OFF butto
n, modifying the
mode or adjusting the set temperature to less
than 24°C will stop ECO operation.
• Under ECO operation, the set temperature
should be 24°C or higher, it may result in
insufficient cooling. If you feel uncomfortable,
just press the ECO button again to stop it.
GEAR operation:
• Press this button to enter the energy efficient
mode in a sequence of following:
75% (up to 75% electrical energy
consumption)
Ę
50% (up to 50% electrical energy
consumption)
Ę
Previous setting mode
•
This function is onl
y available under COOL
mode.
• Under GEAR operation, the display on the
remote controller will alternate between
electrical energy consumption and set
temperature.
TEMP Button
Press and hold
and
buttons together for 3
seconds will alternate the temperature display
between the °C & °F scale.

Midea RG58N2/BGEF Specifications

General

Brand	Midea
Model	RG58N2/BGEF
Category	Remote Control
Language	English