Midea RG58N2/BGEF User Manual

ENGLISH
14
How To Use The Advanced Functions
FP function
When the air
conditioner operates under heating
mode with the set temperature of 16°C(60°F),
pressing
button twice in two seconds will
activate 8°C(46°F) heating. The indoor unit display
shows "FP".
For some units, press this button can activate 12°C
heating feature, please refer to the" Owner's
Manual" of the air conditioner.
Silence function
Hold down Fan speed button( ) tor 2 seconds
to activate/cancel Silent mod
e. Due to
low
frequency operation of compressor, it may result in
insufficient cooling and heating capacity
(applicable to the air conditioner with Silent feature
only)
Boost funct
ion( )
The Boost function makes the unit work extra hard
to reach your present temperature in the shortest
amount of time possible.
•
When you select Boost feature in COOL
mode, the unit will blow cod air with strongest
wind setting to jump-
start the cooling process.
• When you select Boost feature in HEAT
mode, the unit will blo
w heat air with
strongest wind setting to jump-
start the
heating process.
Swing
Button
Used to stop or start vertical louver movement and
set the desired left/right air flow direction. The
vertical louver changes 6 degree in angle for each
press. If keep
pushing more than 2 seconds, the
vertical louver auto swing feature is activated.
Swing
Button
Used to stop or start horizontal louver movement
or set the desired up/down airflow direction. The
louver changes 6 degree in angle for each press. If
keep pushing more than 2 seconds, the louver will
swing up and down automatically.
NOTE:
When the unit is off, press and hold Mode and
buttons together for one second, the louver will
open for a certain angle, which makes it very
convenient for cleaning.
Pre
ss and hold Mode and buttons
together for
one second to reset the
louver.

Midea RG58N2/BGEF Specifications

General

Brand	Midea
Model	RG58N2/BGEF
Category	Remote Control
Language	English