Midea RG58D/BGEFU1

Specifications subject to change without notice.
Service Manual
RG58D/BGEFU1
Wireless Remote Controller
TABLE OF CONTENTS
PAGE
INTRODUCTION 1.......................................
HANDLING THE REMOTE CONTROLLER 2.................
FUNCTION BUTTONS 3...................................
ACCESSING THE SERVICE FUNCTIONS 4...................
REMOTE CONTROLLER FUNCTIONS 5.....................
Auto−Start Function (F1) 5.................................
Auto−Start Function (F1) 5.................................
Heating Temperature Compensation (F2) 5....................
Anti−Cold Air Function (F3) 5..............................
Indoor Fan Motor Speed Control after Set Temperature is Reached (F4) 6
Louver Angle Memory Function (F5). 6.......................
Heating Only or Cooling and Heating Setting (F6). 7.............
Cooling Temperature Compensation (F7). 7....................
Refrigerant Leakage Detection (F8). 7........................
Cleaning Filter Reminder (F9). 7............................
Filter Replacement Reminder (E1). 7.........................
Lowest Temperature Setting (E2). 8..........................
Highest Temperature Setting (E3). 8..........................
Special Anti−Cold Air Function Setting (E4). 8.................
Priority Setting of Heating or Cooling (only on Multi−Zone Systems)
(E5). 8.................................................
Network Address Setting (E6). 8............................
Capacity Code Selection (E7). 8.............................
Twins Setting (E8). 8.....................................
Static Pressure Setting (E9). 8...............................
DEFAULT VALUES OF INDOOR UNITS 9....................
POINT CHECK FUNCTION 9...............................
CODE VALUE 10.........................................
INTRODUCTION
This service manual provides the necessary information to use the
service functions on the RG58D/BGEFU1 wireless remote controller.
Use the Table of Contents to locate a desired topic.
Fig. 1 - Remote Controller

Midea RG58D/BGEFU1 Specifications

General

Model	RG58D/BGEFU1
Wireless Technology	Infrared
Brand	Midea
Power Source	Battery
Battery Type	AAA
Number of Batteries	2
Display Type	LCD
Remote Control Technology	Infrared
Type	Remote Control
Compatible Devices	Air Conditioners

Summary

Service Manual Introduction

Handling the Remote Controller

Guidance on proper placement and usage of the remote controller for optimal signal reception.

Function Buttons Overview

Detailed explanation of each button's function on the remote controller for user interaction.

Accessing Service Functions

Steps to enter and navigate the special service functions mode on the remote controller.

Remote Controller Functions Overview

An overview of the various operational functions controllable via the remote controller.

Remote Controller Functions

Auto-Start Function (F1)

Enables the unit to resume previous settings automatically after a power interruption.

Heating Temperature Compensation (F2)

Adjusts temperature sensing based on room thermal stratification for improved comfort.

Anti-Cold Air Function (F3)

Manages anti-cold air parameters to enhance comfort during heating operations.

Indoor Fan Motor Speed Control (F4)

Controls indoor fan speed once the desired temperature setting is achieved.

Louver Angle Memory Function (F5)

Allows the louvers to remember their position after power loss or unit shutdown.

Heating Only or Cooling and Heating Setting (F6)

Configures the unit to operate in heating-only, cooling-only, or both modes.

Cooling Temperature Compensation (F7)

Fine-tunes temperature sensing for cooling mode based on room thermal stratification.

Refrigerant Leakage Detection (F8)

Enables or disables the refrigerant leakage detection feature for system safety.

Cleaning Filter Reminder (F9)

Activates or deactivates the notification for cleaning the air filter.

Filter Replacement Reminder (E1)

Activates or deactivates the reminder for replacing the air filter.

Lowest Temperature Setting (E2)

Sets the minimum allowable temperature that can be displayed and controlled by the remote.

Highest Temperature Setting (E3)

Sets the maximum allowable temperature that can be displayed and controlled by the remote.

Special Function Setting (E4)

Provides access to special function settings for advanced operational configurations.

Priority Setting of Heating or Cooling (E5)

Defines operational priority between heating and cooling in multi-zone system configurations.

Network Address Setting (E6)

Configuration for network address, intended for future application use.

Capacity Code Selection (E7)

Selection of capacity codes, currently not available for use.

Twins Setting (E8)

Setting for twin unit operation, not available for current applications.

Static Pressure Setting (E9)

Adjusts static pressure settings, primarily for ducted indoor units.

Indoor Unit Data and Diagnostics

Default Values of Indoor Units

Table listing default operational settings for various indoor unit types (Cassette, Ducted, Console).

Point Check Function

Enables system status inquiry, displaying operational codes and meanings for diagnostics.

Code Value Explanations