3
Specifications subject to change without notice.
FUNCTION BUTTONS
Before you use your new system, familiarize yourself with the remote controller. The following is a brief introduction of the remote controller.
Fig. 4 - Remote Controller
NOTE: Remote Controller also available through RCD P/N
17317000A40020. Remote Holder P/N 12117000002113.
1. ON/OFF Use to turn the air conditioner ON and OFF.
2. UP
Use to increase the set temperature or Timer setting hours.
DOWN
Use to decrease the set temperature or Timer setting
hours.
3. FAN− Use to select fan speeds HIGH−MED−LOW−AUTO
4. FAN+ Use to select fan steps AUTO−LOW−MED−HIGH
5. SWING Use to start or stop horizontal louver movement
or set the desired up/down air flow direction.
6. SET
Use to initiate the following functions (in conjunction
with
and ) in the following sequence:
7. SHORT CUT Use to restore the current settings or resume
previous settings.
8. MODE Use to modify the air conditioner mode in the
following sequence:
9. LED Use to turn on/off the indoor screen display.
10. LOCK
Use SHORTCUT and LED simultaneously
to lock or unlock the keyboard.
To Next Page
Loading...
Need help?
General
