Midea RG58N2/BGEF User Manual

ENGLISH
4
NOT SURE WHAT A FUNCTION DOES?
Refer to the
How to Use Basic Functions
and
How to Use Advanced Fu
nctions sections
of
this anual for a detailed
description of how to use
your air conditioner.
SPECIAL NOTE
z Button designs on your unit may differ
slightly
from the example shown.
z
If the indoor unit does not have a particular
function, pressing that functio
n s button on
the remote control will have no effect.
INSERTING AND REPLACING BATTERIES
Put the two batteries(optional parts) in the remote
control before use:
1.
Remove the back cover from the remote
control, exposing the battery compartment.
2.
Insert the batteries, paying attention to
match
up the (+) and (-) ends of the
batteries with
the symbols inside the
battery compartment.
3.
Install the back cover on.
INSTALLING REMOTE CONTROL HOLDER
The remote controller can be attached to a wall or
stand by u
sing a remote controller holder.
1.
Before installing the remote controller, check
that the air conditioner receives the signals
properly.
2.
Install the holder with two screws.
3.
Put the remote controller on the holder.
BATTERY NOTES
For optimum prod
uct performance:
Do not mix old and new batteries, or
batteries of
different types.
Do not leave batteries in the remote control
if you
don t plan on using the device for
more than 2
months.
BATTERY DISPOSAL
Do not dispose of batteries as unsort
ed
municipal
waste. Refer to local laws for
proper disposal of
batteries.
TIPS FOR USING REMOTE CONTROL
z The remote control must be used w
ithin 8
meters of the unit.
z
The unit will beep when remote signal is
received.
z Curtains, other materials and direct
sunlight
can interfere with the infrared
signal receiver.
z Remove batteries if the remote control
will not
be used more than 2 months.
Remove the back cover to install batteries

Midea RG58N2/BGEF Specifications

General

Brand	Midea
Model	RG58N2/BGEF
Category	Remote Control
Language	English