MCAC-HTSM-201506 Midea R410A Direct Heating Commercial Heat Pump 50Hz Technical Manual
68
At this time the hour of the clock will flash, it means the current setting is the hour
of the Timer 2 on. And the follow setting method will be the same as the Timer 1.
Similarly, the setting of Timing 3 is the same as this method. After setting is
finished, press OK key or wait for 7 seconds to confirm the setting, and the LCD
will display the effective timing information, as the following display:
Example of timing setting:
During any period of timing setting to press OK key, the timing periods which have
been set will be effective (only if the on and off of one timing period have been set,
the setting is effective).
To Next Page
Loading...
