Midea S8+ - Cleaning and Maintenance

24
23
Cleaning the Side Brush
Pull to remove the side brushes. Remove any tangled hair, debris, and then
reinstall them.
It is recommended to clean the side brushes every week and replace them
every 6-12 months.
1.
2.
Cleaning the Dustbin and Filter Elements
Empty the dustbin after each use.
NOTE
Press dustbin release button to remove
dustbin from robot.
1. Empty the dustbin.2.
Dustbin
Release Button
If side brushes are curled, you can remove them and place in warm water (Suggested 30 - 50°C ) for
30 seconds and then let it thoroughly dry.
NOTE
CLEANING AND MAINTENANCE
Cleaning the Main Brush
Turn over the main unit. Remove the cover and take out the main brush.
Use the cleaning brush or scissors to clean the tangled hair or debris.
1.
Dry the main brush and cover thoroughly, and then reinsert them back in the robot. It
is recommended to clean the main brush every week and replace it every 6-12 months.
2.
Remove hair
from the brush