12 Screw
For fixing the safety drain tray
CAUTION
Fig.4-15
Fig.4-16
14~16kw/h
Water Tray
Position A
Position B
Safety Drain Tray
1. The whole unit status show as Fig.4-15.
2. Remove the all 1 1
screw
from fixed Safety Drain T ra y , and then take o f f the tray as figure showed in Fig.4-16.
3. T ake o f f the tray along the direction of the arrow show in Fig.4-16.
4. Clean the tray and evaporato r .
5. Re-install the unit follow the reverse above orders.
1. Please shut down the unit and cut o f f power cable before maintain the moto r .
2. Don’t heavy pull the foam tra y , when dismounting; otherwise the foam tray would break.
7
installation manual
To Next Page
Loading...
