R410A 380~415V 3Ph 50Hz TempMaker Series Split AC MCAC-UTSM-2014-03
121
2.2 Wired controller outlook
2.3 Operation instructions
1) Remote signal receiving function:
the wired controller can be a remote signal receiving device, it is possible to use the wireless
remote controller to control the air conditioner through the wired controller when the system have
been powered on.
Notes: The wired controller will not receive the swing controlling instruction. For the indoor unit with
swinging function, you can directly use the wireless remote controller to control swinging through the
display panel of the indoor unit, or use the swing button on the wired remote controller to control the
indoor unit for swinging.
2) On and off the air conditioner:
Press the On/Off button to control the indoor unit on and off status.
When the unit is turned off, press the On/Off button, the unit will be turned on and the
operating icon lights up.
When the unit is turned on, press the On/Off button, the unit will be turned off the operating
icon lights off.
To Next Page
Loading...
Need help?
General
