EasyManua.ls Logo

Midea TempMaker Series - User Manual

Midea TempMaker Series
152 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MCAC-UTSM-2014-03 R410A 380~415V 3Ph 50Hz TempMaker Series Split AC
0
Midea R410A T1 380V 50Hz 3Ph
Split Type TempMaker series
Technical Manual
Applicable Model:
Indoor unit Outdoor unit
MTB-76HWN1 MOV-76HN1-R
MTB-96HWN1 MOV-96HN1-R
MTB-120HWN1 MOV-120HN1-R
MHB-76HWN1 MOV-150HN1-R
MHB-96HWN1 MOV-192HN1-R
MHA-150HWN1
MHA-192HWN1
MFA2-76HRN1
MFA2-96HRN1
Midea reserves the right to discontinue, or change specification or designs at any time without notices and
without incurring obligations.
Библиотека СОК

Questions and Answers

  • V
    vickiwoodAug 6, 2025
    Why is my Midea TempMaker Air Conditioner cooling effect poor?
    • J
      John AllenAug 6, 2025
      Several factors can cause a poor cooling effect. The condenser or evaporator may be dirty, requiring you to clean the heat exchanger. The filter might be blocked, so cleaning the filter is necessary. Ensure the intake or exhaust vents of the indoor and outdoor units aren't blocked by removing any obstructions to maintain ventilation. Closing any open windows and doors can help, as well as obstructing direct sunlight with curtains. Reducing heat sources in the room can also improve cooling. The refrigerant may be leaking or deficient, requiring leak detection and refilling the correct amount. Also, if the outdoor environment temperature is too high, the cooling effect of the air conditioner is deteriorated, which is normal.
  • E
    eflowersAug 16, 2025
    How to fix a Midea TempMaker Air Conditioner that does not run?
    • A
      Amanda HendersonAug 16, 2025
      If the system isn't running, it might be due to a power supply failure. Operate it after the power supply resumes, ensuring it's properly connected. Also, check the remote controller or wired controller. If the fuse blows or the circuit breaker trips, replace the fuse or check for electrical leakage.
  • S
    Shannon DavidsonAug 26, 2025
    Why is the heating effect poor in my Midea TempMaker Air Conditioner?
    • S
      Steven SummersAug 26, 2025
      A poor heating effect can occur if the outdoor temperature is below -7°C; in this case, use a heating device because the unit cannot operate normally. Ensure that all doors and windows are tightly closed. Also, the refrigerant may be leaking or deficient, requiring leak detection and refilling to the correct quantity.

Summary

General Information

Model Names of Indoor;Outdoor Units

Lists all applicable indoor and outdoor unit models for the series.

External Appearance

Provides visual representations of indoor and outdoor unit designs.

Nomenclature

Explains the meaning of characters used in model names for units.

Med-static Pressure Duct Indoor Unit

Features

Highlights key advantages and capabilities of the indoor unit.

Specifications

Details technical specifications for cooling, heating, fan, and coil.

Dimensions

Provides detailed physical dimensions for the indoor unit.

Service Spaces

Specifies required clearances around the indoor unit for installation/maintenance.

Refrigerant Circuits

Illustrates the refrigerant flow path within the system.

Wiring Diagrams

Shows the electrical connections and layout for the indoor unit.

Capacity Tables

Presents cooling capacity data across various operating conditions.

Static Pressure Curves

Illustrates fan performance characteristics at different static pressures.

Electric Characteristics

Details electrical parameters like voltage, current, and power.

Sound Levels

Lists the noise emission levels for the indoor unit.

Accessories

Lists included accessories for the indoor unit.

Hi-static Pressure Duct Indoor Unit

Features

Highlights key advantages and capabilities of the indoor unit.

Specifications

Details technical specifications for cooling, heating, fan, and coil.

Dimensions

Provides detailed physical dimensions for the indoor unit.

Service Space

Specifies required clearances around the indoor unit for installation/maintenance.

Refrigerant circuits

Illustrates the refrigerant flow path within the system.

Wiring Diagrams

Shows the electrical connections and layout for the indoor unit.

Capacity Tables

Presents cooling capacity data across various operating conditions.

Static Pressure Curve

Illustrates fan performance characteristics at different static pressures.

Electric Characteristics

Details electrical parameters like voltage, current, and power.

Sound Levels

Lists the noise emission levels for the indoor unit.

Accessories

Lists included accessories for the indoor unit.

Floor-standing Indoor Unit

Features

Highlights key advantages and capabilities of the floor-standing unit.

Specifications

Details technical specifications for cooling, heating, fan, and coil.

Dimensions

Provides physical dimensions for the floor-standing indoor unit.

Service Spaces

Specifies required clearances around the indoor unit for installation/maintenance.

Refrigerant circuits

Illustrates the refrigerant flow path within the system.

Wiring Diagrams

Shows the electrical connections and layout for the indoor unit.

Capacity Tables

Presents cooling capacity data across various operating conditions.

Electric Characteristics

Details electrical parameters like voltage, current, and power.

Sound Levels

Lists the noise emission levels for the indoor unit.

Accessories

Lists included accessories for the indoor unit.

Outdoor Unit

Specifications

Details technical specifications for outdoor units.

Dimensions

Provides physical dimensions for various outdoor unit models.

Service Spaces

Specifies required clearances around the outdoor unit for installation/maintenance.

Wiring Diagrams

Shows electrical connections and layouts for outdoor units.

Electric Characteristics

Details electrical parameters for outdoor unit components.

Sound Levels

Lists the noise emission levels for outdoor units.

Installation

Notes

Important safety and general installation guidelines.

Installation of Duct Type Indoor Units

Step-by-step guide for installing duct-type indoor units.

Installation of Floor Standing Type Indoor Units

Step-by-step guide for installing floor-standing indoor units.

Installation of Outdoor Units

Procedures for installing outdoor units, including clearances and anchoring.

Connection of Refrigerant Pipe

Details on connecting indoor and outdoor unit refrigerant pipes.

Heat Insulation of Refrigerant Pipe

Guidelines for insulating refrigerant pipes to prevent condensation.

Electric Connection

Instructions for proper electrical wiring and connections.

Duct Design Scheme

Examples and considerations for designing ventilation ductwork.

Trial Run

Procedures for performing initial operation checks after installation.

Trouble shooting

Common issues, causes, and solutions for air conditioner malfunctions.

Maintenance

Guidelines for routine upkeep and long-term care of the unit.

Controller

Wireless Remote Controller

Details specifications and operation of the wireless remote controller.

Wired Controller: KJR-29 B

Specifications and operation guide for the wired duct controller.

Centralized Controller: MD-CCM03(A)

Specifications and operation of the optional centralized controller.

Midea TempMaker Series Specifications

General IconGeneral
BrandMidea
ModelTempMaker Series
CategoryAir Conditioner
LanguageEnglish

Related product manuals