Service Manual, 2016-12
10 / 42
3.Installation and commissioning
3.1Handling
1) Protect the refrigerator in moving it
Same as shown as left photo, please move it by
handcart with cushion
2) Remove all packing materials and bottom
cushion, then move into house for placement
3) After moving it to appropriate location, wait for
2 hours before power on.
3.2 Door Disassembly and Assembly（None）
The refrigerator door needs to be dismantled if it cannot enter the room in the whole.
3.3 Installation location
Location that is easy for ventilation shall be
chosen to facilitate heat dissipation, enhance
its performance and reduce the energy
consumption.
To Next Page
Loading...
